Options that affect security: See Section 5.6.3, “Security-Related mysqld Options”.

SSL-related options: See Section 5.8.7.3, “SSL Command Options”.

Binary log control options: See Section 5.11.4, “The Binary Log”.

Replication-related options: See Section 6.1.3, “Replication Options and Variables”.

Options specific to particular storage engines: See Section 14.4.1, “MyISAM Startup Options”, Section 14.5.4, “InnoDB Startup Options and System Variables”, and Section 15.6.5.1, “MySQL Cluster-Related Command Options for mysqld”.

--help, -?

Display a short help message and exit. Use both the --verbose and --help options to see the full message.

--abort-slave-event-count

This option is used internally by the MySQL test suite for replication testing and debugging.

--allow-suspicious-udfs

This option controls whether user-defined functions that have only an xxx symbol for the main function can be loaded. By default, the option is off and only UDFs that have at least one auxiliary symbol can be loaded; this prevents attempts at loading functions from shared object files other than those containing legitimate UDFs. See Section 26.3.4.6, “User-Defined Function Security Precautions”.

--ansi

Use standard (ANSI) SQL syntax instead of MySQL syntax. For more precise control over the server SQL mode, use the --sql-mode option instead. See Section 1.9.3, “Running MySQL in ANSI Mode”, and Section 5.2.6, “SQL Modes”.

--basedir=path, -b path

The path to the MySQL installation directory. All paths are usually resolved relative to this directory.

big-tables

Allow large result sets by saving all temporary sets in files. This option prevents most “table full” errors, but also slows down queries for which in-memory tables would suffice. Since MySQL 3.23.2, the server is able to handle large result sets automatically by using memory for small temporary tables and switching to disk tables where necessary.

--bind-address=IP

The IP address to bind to.

--binlog-format={row|statement}

Specify whether to use row-based or statement-based replication (statement-based is default). See Section 6.1.2, “Replication Formats”. This option was added in MySQL 5.1.5.

--binlog-row-event-max-size=N

Specify the maximum size of a row-based binary log event, in bytes. Rows are grouped into events smaller than this size if possible. The value should be a multiple of 256. The default is 1024. See Section 6.1.2, “Replication Formats”. This option was added in MySQL 5.1.5.

--bootstrap

This option is used by the mysql_install_db script to create the MySQL privilege tables without having to start a full MySQL server.

This option is unavailable if MySQL was configured with the --disable-grant-options option. See Section 2.9.2, “Typical configure Options”.

--character-sets-dir=path

The directory where character sets are installed. See Section 5.10.1, “The Character Set Used for Data and Sorting”.

--character-set-client-handshake

Don't ignore character set information sent by the client. To ignore client information and use the default server character set, use --skip-character-set-client-handshake; this makes MySQL behave like MySQL 4.0.

--character-set-filesystem=charset_name

The filesystem character set. This option sets the character_set_filesystem system variable. It was added in MySQL 5.1.6.

--character-set-server=charset_name, -C charset_name

Use charset_name as the default server character set. See Section 5.10.1, “The Character Set Used for Data and Sorting”. If you use this option to specify a non-default character set, you should also use --collation-server to specify the collation.

--chroot=path

Put the mysqld server in a closed environment during startup by using the chroot() system call. This is a recommended security measure. Note that use of this option somewhat limits LOAD DATA INFILE and SELECT ... INTO OUTFILE.

--collation-server=collation_name

Use collation_name as the default server collation. See Section 5.10.1, “The Character Set Used for Data and Sorting”.

--console

(Windows only.) Write error log messages to stderr and stdout even if --log-error is specified. mysqld does not close the console window if this option is used.

--core-file

Write a core file if mysqld dies. For some systems, you must also specify the --core-file-size option to mysqld_safe. See Section 5.3.1, “mysqld_safe — MySQL Server Startup Script”. Note that on some systems, such as Solaris, you do not get a core file if you are also using the --user option.

--datadir=path, -h path

The path to the data directory.

--debug[=debug_options], -# [debug_options]

If MySQL is configured with --with-debug, you can use this option to get a trace file of what mysqld is doing. The debug_options string often is 'd:t:o,file_name'. The default is 'd:t:i:o,mysqld.trace'. See Creating Trace Files.

As of MySQL 5.1.12, using --with-debug to configure MySQL with debugging support enables you to use the --debug="d,parser_debug" option when you start the server. This causes the Bison parser that is used to process SQL statements to dump a parser trace to the server's standard error output. Typically, this output is written to the error log.

--default-character-set=charset_name (DEPRECATED)

Use charset_name as the default character set. This option is deprecated in favor of --character-set-server. See Section 5.10.1, “The Character Set Used for Data and Sorting”.

--default-collation=collation_name

Use collation_name as the default collation. This option is deprecated in favor of --collation-server. See Section 5.10.1, “The Character Set Used for Data and Sorting”.

--default-storage-engine=type

Set the default storage engine (table type) for tables. See Chapter 14, Storage Engines and Table Types.

--default-table-type=type

This option is a synonym for --default-storage-engine.

--default-time-zone=timezone

Set the default server time zone. This option sets the global time_zone system variable. If this option is not given, the default time zone is the same as the system time zone (given by the value of the system_time_zone system variable.

--delay-key-write[={OFF|ON|ALL}]

Specify how to use delayed key writes. Delayed key writing causes key buffers not to be flushed between writes for MyISAM tables. OFF disables delayed key writes. ON enables delayed key writes for those tables that were created with the DELAY_KEY_WRITE option. ALL delays key writes for all MyISAM tables. See Section 7.5.2, “Tuning Server Parameters”, and Section 14.4.1, “MyISAM Startup Options”.

Note: If you set this variable to ALL, you should not use MyISAM tables from within another program (such as another MySQL server or myisamchk) when the tables are in use. Doing so leads to index corruption.

--des-key-file=file_name

Read the default DES keys from this file. These keys are used by the DES_ENCRYPT() and DES_DECRYPT() functions.

--disconnect-slave-event-count

This option is used internally by the MySQL test suite for replication testing and debugging.

--enable-named-pipe

Enable support for named pipes. This option applies only on Windows NT, 2000, XP, and 2003 systems, and can be used only with the mysqld-nt and mysqld-debug servers that support named-pipe connections.

--event-scheduler

Enable or disable, and start or stop, the event scheduler. This option was added in MySQL 5.1.6. Note that its permitted values and behaviour changed in MySQL 5.1.11, and again in MySQL 5.1.12.

For detailed information, see The event-scheduler Option.

--exit-info[=flags], -T [flags]

This is a bit mask of different flags that you can use for debugging the mysqld server. Do not use this option unless you know exactly what it does!

--external-locking

Enable external locking (system locking), which is disabled by default as of MySQL 4.0. Note that if you use this option on a system on which lockd does not fully work (such as Linux), it is easy for mysqld to deadlock. This option previously was named --enable-locking.

For more information about external locking, including conditions under which it can and cannot be used, see Section 7.3.4, “External Locking”.

--flush

Flush (synchronize) all changes to disk after each SQL statement. Normally, MySQL does a write of all changes to disk only after each SQL statement and lets the operating system handle the synchronizing to disk. See Section B.1.4.2, “What to Do If MySQL Keeps Crashing”.

--general-log[={0|1}]

Specify the initial general log state, if the --log or -l option is given. With no argument or an argument of 0, the --general-log option disables the log. If omitted or given with an argument of 1, the option enables the log. If --log or -l is not specified, --general-log has no effect. This option was added in MySQL 5.1.12.

--enable-pstack

Print a symbolic stack trace on failure.

--gdb

Install an interrupt handler for SIGINT (needed to stop mysqld with ^C to set breakpoints) and disable stack tracing and core file handling. See Debugging mysqld under gdb.

--init-file=file_name

Read SQL statements from this file at startup. Each statement must be on a single line and should not include comments.

This option is unavailable if MySQL was configured with the --disable-grant-options option. See Section 2.9.2, “Typical configure Options”.

--innodb-xxx

The InnoDB options are listed in Section 14.5.4, “InnoDB Startup Options and System Variables”.

--language=lang_name, -L lang_name

Return client error messages in the given language. lang_name can be given as the language name or as the full pathname to the directory where the language files are installed. See Section 5.10.2, “Setting the Error Message Language”.

--large-pages

Some hardware/operating system architectures support memory pages greater than the default (usually 4KB). The actual implementation of this support depends on the underlying hardware and OS. Applications that perform a lot of memory accesses may obtain performance improvements by using large pages due to reduced Translation Lookaside Buffer (TLB) misses.

Currently, MySQL supports only the Linux implementation of large pages support (which is called HugeTLB in Linux). We have plans to extend this support to FreeBSD, Solaris and possibly other platforms.

Before large pages can be used on Linux, it is necessary to configure the HugeTLB memory pool. For reference, consult the hugetlbpage.txt file in the Linux kernel source.

This option is disabled by default.

--log[=file_name], -l [file_name]

This option enables logging to the general query log, which contains entries that record client connections and SQL statements received from clients. The log output destination can be selected with the --log-output option as of MySQL 5.1.6. Before 5.1.6, logging occurs to the general query log file. If you omit the filename, MySQL uses host_name.log as the filename. See Section 5.11.1, “Selecting General Query and Slow Query Log Output Destinations”, and Section 5.11.3, “The General Query Log”.

--log-bin[=base_name]

Enable binary logging. The server logs all statements that change data to the binary log, which is used for backup and replication. See Section 5.11.4, “The Binary Log”.

The option value, if given, is the basename for the log sequence. The server creates binary log files in sequence by adding a numeric suffix to the basename. It is recommended that you specify a basename (see Section B.1.8.1, “Open Issues in MySQL”, for the reason). Otherwise, MySQL uses host_name-bin as the basename.

--log-bin-index[=file_name]

The index file for binary log filenames. See Section 5.11.4, “The Binary Log”. If you omit the filename, and if you didn't specify one with --log-bin, MySQL uses host_name-bin.index as the filename.

--log-bin-trust-function-creators[={0|1}]

With no argument or an argument of 1, this option sets the log_bin_trust_function_creators system variable to 1. With an argument of 0, this option sets the system variable to 0. log_bin_trust_function_creators affects how MySQL enforces restrictions on stored function creation. See Section 18.4, “Binary Logging of Stored Routines and Triggers”.

--log-error[=file_name]

Log errors and startup messages to this file. See Section 5.11.2, “The Error Log”. If you omit the filename, MySQL uses host_name.err. If the filename has no extension, the server adds an extension of .err.

--log-isam[=file_name]

Log all MyISAM changes to this file (used only when debugging MyISAM).

--log-long-format (DEPRECATED)

Log extra information to the update log, binary update log, and slow query log, if they have been activated. For example, the username and timestamp are logged for all queries. This option is deprecated, as it now represents the default logging behavior. (See the description for --log-short-format.) The --log-queries-not-using-indexes option is available for the purpose of logging queries that do not use indexes to the slow query log.

--log-output[=value,...]

This option determines the destination for general query log and slow query log output. The option value can be given as one or more of the words TABLE, FILE, or NONE. If the option is given without a value, the default is TABLE (log to the general_log and slow_log tables in the mysql database). FILE causes logging to log files. (For FILE logging, the --log and -slow-log options determine the log file location.) NONE disables logging. If NONE is present in the option value, it takes precedence over any other words that are present. TABLE and FILE can both be given to select to both log output destinations.

This option selects log output destinations, but does not enable log output. To do that, use the --log and --log-slow-queries options. For more information, see Section 5.11.1, “Selecting General Query and Slow Query Log Output Destinations”.

The --log-output option was added in MySQL 5.1.6.

--log-queries-not-using-indexes

If you are using this option with --log-slow-queries, queries that do not use indexes are logged to the slow query log. See Section 5.11.5, “The Slow Query Log”.

--log-short-format

Log less information to the update log, binary update log, and slow query log, if they have been activated. For example, the username and timestamp are not logged for queries.

--log-slow-admin-statements

Log slow administrative statements such as OPTIMIZE TABLE, ANALYZE TABLE, and ALTER TABLE to the slow query log.

--log-slow-queries[=file_name]

This option enables logging to the slow query log, which contains entries for all queries that have taken more than long_query_time seconds to execute. See the descriptions of the --log-long-format and --log-short-format options for details.

The log output destination can be selected with the --log-output option as of MySQL 5.1.6. Before 5.1.6, logging occurs to the slow query log file. If you omit the filename, MySQL uses host_name-slow.log as the filename. See Section 5.11.1, “Selecting General Query and Slow Query Log Output Destinations”, and Section 5.11.5, “The Slow Query Log”.

--log-tc=file_name

The name of the memory-mapped transaction coordinator log file (for XA transactions that affect multiple storage engines when the binary log is disabled). The default name is tc.log. The file is created under the data directory if not given as a full pathname. Currently, this option is unused.

--log-tc-size=size

The size in bytes of the memory-mapped transaction coordinator log. The default size is 24KB.

--log-warnings[=level], -W [level]

Print out warnings such as Aborted connection... to the error log. Enabling this option is recommended, for example, if you use replication (you get more information about what is happening, such as messages about network failures and reconnections). This option is enabled (1) by default, and the default level value if omitted is 1. To disable this option, use --log-warnings=0. Aborted connections are not logged to the error log unless the value is greater than 1. See Section B.1.2.10, “Communication Errors and Aborted Connections”.

--low-priority-updates

Give table-modifying operations (INSERT, REPLACE, DELETE, UPDATE) lower priority than selects. This can also be done via {INSERT | REPLACE | DELETE | UPDATE} LOW_PRIORITY ... to lower the priority of only one query, or by SET LOW_PRIORITY_UPDATES=1 to change the priority in one thread. See Section 7.3.2, “Table Locking Issues”.

--max-binlog-dump-events

This option is used internally by the MySQL test suite for replication testing and debugging.

--memlock

Lock the mysqld process in memory. This works on systems such as Solaris that support the mlockall() system call. This might help if you have a problem where the operating system is causing mysqld to swap on disk. Note that use of this option requires that you run the server as root, which is normally not a good idea for security reasons. See Section 5.6.5, “How to Run MySQL as a Normal User”.

--myisam-recover[=option[,option]...]]

Set the MyISAM storage engine recovery mode. The option value is any combination of the values of DEFAULT, BACKUP, FORCE, or QUICK. If you specify multiple values, separate them by commas. You can also use a value of "" to disable this option. If this option is used, each time mysqld opens a MyISAM table, it checks whether the table is marked as crashed or wasn't closed properly. (The last option works only if you are running with external locking disabled.) If this is the case, mysqld runs a check on the table. If the table was corrupted, mysqld attempts to repair it.

The following options affect how the repair works:

Before the server automatically repairs a table, it writes a note about the repair to the error log. If you want to be able to recover from most problems without user intervention, you should use the options BACKUP,FORCE. This forces a repair of a table even if some rows would be deleted, but it keeps the old data file as a backup so that you can later examine what happened.

See Section 14.4.1, “MyISAM Startup Options”.

--ndb-connectstring=connect_string

When using the NDB storage engine, it is possible to point out the management server that distributes the cluster configuration by setting the connect string option. See Section 15.4.4.2, “The Cluster Connectstring”, for syntax.

--ndbcluster

If the binary includes support for the NDB Cluster storage engine, this option enables the engine, which is disabled by default. See Chapter 15, MySQL Cluster.

--old-passwords

Force the server to generate short (pre-4.1) password hashes for new passwords. This is useful for compatibility when the server must support older client programs. See Section 5.7.9, “Password Hashing as of MySQL 4.1”.

--one-thread

Only use one thread (for debugging under Linux). This option is available only if the server is built with debugging enabled. See Debugging a MySQL Server.

--open-files-limit=count

Change the number of file descriptors available to mysqld. If this option is not set or is set to 0, mysqld uses the value to reserve file descriptors with setrlimit(). If the value is 0, mysqld reserves max_connections×5 or max_connections + table_open_cache×2 files (whichever is larger). You should try increasing this value if mysqld gives you the error Too many open files.

--pid-file=path

The pathname of the process ID file. This file is used by other programs such as mysqld_safe to determine the server's process ID.

--port=port_num, -P port_num

The port number to use when listening for TCP/IP connections. The port number must be 1024 or higher unless the server is started by the root system user.

--port-open-timeout=num

On some systems, when the server is stopped, the TCP/IP port might not become available immediately. If the server is restarted quickly afterward, its attempt to reopen the port can fail. This option indicates how many seconds the server should wait for the TCP/IP port to become free if it cannot be opened. The default is not to wait. This option was added in MySQL 5.1.5.

--safe-mode

Skip some optimization stages.

--safe-show-database (DEPRECATED)

See Section 5.7.3, “Privileges Provided by MySQL”.

--safe-user-create

If this option is enabled, a user cannot create new MySQL users by using the GRANT statement, if the user doesn't have the INSERT privilege for the mysql.user table or any column in the table.

--secure-auth

Disallow authentication by clients that attempt to use accounts that have old (pre-4.1) passwords.

--shared-memory

Enable shared-memory connections by local clients. This option is available only on Windows.

--shared-memory-base-name=name

The name of shared memory to use for shared-memory connections. This option is available only on Windows. The default name is MYSQL. The name is case sensitive.

--skip-concurrent-insert

Turn off the ability to select and insert at the same time on MyISAM tables. (This is to be used only if you think you have found a bug in this feature.) See Section 7.3.3, “Concurrent Inserts”.

--skip-external-locking

Do not use external locking (system locking). For more information about external locking, including conditions under which it can and cannot be used, see Section 7.3.4, “External Locking”.

External locking has been disabled by default since MySQL 4.0.

--skip-grant-tables

This option causes the server not to use the privilege system at all, which gives anyone with access to the server unrestricted access to all databases. You can cause a running server to start using the grant tables again by executing mysqladmin flush-privileges or mysqladmin reload command from a system shell, or by issuing a MySQL FLUSH PRIVILEGES statement after connecting to the server. This option also suppresses loading of plugins and user-defined functions (UDFs). Beginning with MySQL 5.1.17, it also suppresses loading of scheduled events (Bug#28607).

This option is unavailable if MySQL was configured with the --disable-grant-options option. See Section 2.9.2, “Typical configure Options”.

--skip-host-cache

Do not use the internal hostname cache for faster name-to-IP resolution. Instead, query the DNS server every time a client connects. See Section 7.5.6, “How MySQL Uses DNS”.

--skip-innodb

Disable the InnoDB storage engine. This saves memory and disk space and might speed up some operations. Do not use this option if you require InnoDB tables.

--skip-name-resolve

Do not resolve hostnames when checking client connections. Use only IP numbers. If you use this option, all Host column values in the grant tables must be IP numbers or localhost. See Section 7.5.6, “How MySQL Uses DNS”.

--skip-ndbcluster

Disable the NDB Cluster storage engine. This is the default for binaries that were built with NDB Cluster storage engine support; the server allocates memory and other resources for this storage engine only if the --ndbcluster option is given explicitly. See Section 15.4.3, “Quick Test Setup of MySQL Cluster”, for an example of usage.

--skip-networking

Don't listen for TCP/IP connections at all. All interaction with mysqld must be made via named pipes or shared memory (on Windows) or Unix socket files (on Unix). This option is highly recommended for systems where only local clients are allowed. See Section 7.5.6, “How MySQL Uses DNS”.

--sporadic-binlog-dump-fail

This option is used internally by the MySQL test suite for replication testing and debugging.

--ssl*

Options that begin with --ssl specify whether to allow clients to connect via SSL and indicate where to find SSL keys and certificates. See Section 5.8.7.3, “SSL Command Options”.

--standalone

Available on Windows NT-based systems only; instructs the MySQL server not to run as a service.

--symbolic-links, --skip-symbolic-links

Enable or disable symbolic link support. This option has different effects on Windows and Unix:

--skip-safemalloc

If MySQL is configured with --with-debug=full, all MySQL programs check for memory overruns during each memory allocation and memory freeing operation. This checking is very slow, so for the server you can avoid it when you don't need it by using the --skip-safemalloc option.

--skip-show-database

With this option, the SHOW DATABASES statement is allowed only to users who have the SHOW DATABASES privilege, and the statement displays all database names. Without this option, SHOW DATABASES is allowed to all users, but displays each database name only if the user has the SHOW DATABASES privilege or some privilege for the database. Note that any global privilege is considered a privilege for the database.

--skip-stack-trace

Don't write stack traces. This option is useful when you are running mysqld under a debugger. On some systems, you also must use this option to get a core file. See Debugging a MySQL Server.

--skip-thread-priority

Disable using thread priorities for faster response time.

--slow-query-log[={0|1}]

Specify the initial slow query log state, if the --log-slow-queries option is given. With no argument or an argument of 0, the --slow-query-log option disables the log. If omitted or given with an argument of 1, the option enables the log. If --log or -l is not specified, --slow-query-log has no effect. This option was added in MySQL 5.1.12.

--socket=path

On Unix, this option specifies the Unix socket file to use when listening for local connections. The default value is /tmp/mysql.sock. On Windows, the option specifies the pipe name to use when listening for local connections that use a named pipe. The default value is MySQL (not case sensitive).

--sql-mode=value[,value[,value...]]

Set the SQL mode. See Section 5.2.6, “SQL Modes”.

--sysdate-is-now

SYSDATE() by default returns the time at which it executes, not the time at which the statement in which it occurs begins executing. This differs from the behavior of NOW(). This option causes SYSDATE() to be an alias for NOW(). For information about the implications for binary logging and replication, see the description for SYSDATE() in Section 12.6, “Date and Time Functions” and for SET TIMESTAMP in Section 13.5.3, “SET Syntax”.

This option was added in MySQL 5.1.8.

--tc-heuristic-recover={COMMIT|ROLLBACK}

The type of decision to use in the heuristic recovery process. Currently, this option is unused.

--temp-pool

This option causes most temporary files created by the server to use a small set of names, rather than a unique name for each new file. This works around a problem in the Linux kernel dealing with creating many new files with different names. With the old behavior, Linux seems to “leak” memory, because it is being allocated to the directory entry cache rather than to the disk cache.

--transaction-isolation=level

Sets the default transaction isolation level. The level value can be READ-UNCOMMITTED, READ-COMMITTED, REPEATABLE-READ, or SERIALIZABLE. See Section 13.4.6, “SET TRANSACTION Syntax”.

--tmpdir=path, -t path

The path of the directory to use for creating temporary files. It might be useful if your default /tmp directory resides on a partition that is too small to hold temporary tables. This option accepts several paths that are used in round-robin fashion. Paths should be separated by colon characters (‘:’) on Unix and semicolon characters (‘;’) on Windows, NetWare, and OS/2. If the MySQL server is acting as a replication slave, you should not set --tmpdir to point to a directory on a memory-based filesystem or to a directory that is cleared when the server host restarts. For more information about the storage location of temporary files, see Section B.1.4.4, “Where MySQL Stores Temporary Files”. A replication slave needs some of its temporary files to survive a machine restart so that it can replicate temporary tables or LOAD DATA INFILE operations. If files in the temporary file directory are lost when the server restarts, replication fails.

--user={user_name|user_id}, -u {user_name|user_id}

Run the mysqld server as the user having the name user_name or the numeric user ID user_id. (“User” in this context refers to a system login account, not a MySQL user listed in the grant tables.)

This option is mandatory when starting mysqld as root. The server changes its user ID during its startup sequence, causing it to run as that particular user rather than as root. See Section 5.6.1, “General Security Guidelines”.

To avoid a possible security hole where a user adds a --user=root option to a my.cnf file (thus causing the server to run as root), mysqld uses only the first --user option specified and produces a warning if there are multiple --user options. Options in /etc/my.cnf and $MYSQL_HOME/my.cnf are processed before command-line options, so it is recommended that you put a --user option in /etc/my.cnf and specify a value other than root. The option in /etc/my.cnf is found before any other --user options, which ensures that the server runs as a user other than root, and that a warning results if any other --user option is found.

--version, -V

Display version information and exit.